Documentation Home Page ◇ HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Controlled V Source, Series
- Sylvain Ménard
- Jean-Nicolas Brunet
Description
The controlled voltage source represent a three-phase A.C. source with a series or parallel RLC impedance. In the network, this source only generates the signal received on the control connectors. Hence, this process serves only to amplify or inject a signal in the network.
Source can be controlled as a single-phase or three-phase source based on the number of signal connected to the input port. The source has a purely resitive impedence that can be set in the form.
Mask and Parameters
| Name | Description | Unit |
|---|---|---|
R | Resistance value in ohms | ohms |
Ports, Inputs, Outputs and Signals Available for Monitoring
Ports
- Positive and negative power ports.
Inputs
- V input (voltage source): The voltage amplitude signal.
Outputs
- I output (voltage source): The current signal flowing from the source.
Sensors
- Ia :Measured current (voltage source) (A).
- Pout: Measured instaneous power (W)
- Va: Source voltage (V).
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323