The OP5332 module provides 16 isolated analog output channels, sampled at 2MS/s and producing ±16V output values.

Main Features

• 8 pairs of isolated analog output channels (16 channels total)
• 16-bit resolution
• Simultaneous sampling at 2 MS/s
• Voltage range ±16V
• Maximum current 10mA
• Factory-calibrated

Channel description

Each channel uses a dedicated 16-bit resolution digital-to-analog converter.

All outputs are sampled simultaneously at 2 MS/s, giving a total throughput of 32 MS/s.

The channels are isolated by pair.

Current/voltage characteristics

The output signal voltage range is ±16 volts.

The maximum current per channel is ±10 mA.

Calibration

The card is factory-calibrated to ensure accurate output values with a maximum of ±10 mV absolute error.

To ensure the ±10mV precision, a warm-up time of 10mn is necessary.

Typical Use Cases

The following diagram provides an example of a typical setup using the OP5332. An analog output signal is sent to the unit under test. The maximum current rating of the signal is 10mA.