HIL2GO-310 - I/O Slot 2, Section B, P3 (CH 00-15) - Analog Outputs (OP48H10)

Connected I/O module is OP48H10 Fast I/O type H Module

Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations.
Before connecting the cables, make sure that the voltages or other electrical specifications are compatible with OPAL-RT DB37 specifications of I/O module OP48H10.

Connector P3 Slot 2 - Section B - Channels 00 to 15
DB37F Pin	Assignment	DB37F Pin	Assignment
1	+AOUT00	20	GND
2	+AOUT01	21	GND
3	+AOUT02	22	GND
4	+AOUT03	23	GND
5	+AOUT04	24	GND
6	+AOUT05	25	GND
7	+AOUT06	26	GND
8	+AOUT07	27	GND
9	+AOUT08	28	GND
10	+AOUT09	29	GND
11	+AOUT10	30	GND
12	+AOUT11	31	GND
13	+AOUT12	32	GND
14	+AOUT13	33	GND
15	+AOUT14	34	GND
16	+AOUT15	35	GND
17	Reserved	36	GND
18	Reserved	37	Reserved
19	GND

Analog output channels in this bitstream can be reserved by eHS and managed in the Schematic Editor.

DIGITAL OUTPUT BLOCK PARAMETERS
Parameters	CH00-07	CH08-15
Controller Name	'OP4810 OpCtrl'
Data Out Port Number	11	12
Number of channels	8	8
Voltage Range	-10 V to +10 V	-10 V to +10 V

HIL2GO Bundles

HIL2GO-310 - I/O Slot 2, Section B, P3 (CH 00-15) - Analog Outputs (OP48H10)

Analytics