HIL2GO-310 - I/O Slot 2, Section A, P1 and P2 (CH 00-31) - Digital Inputs or Outputs (OP48H10)

Connected I/O module is OP48H10 Fast I/O type H Module

Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations.
Before connecting the cables, make sure that the voltages or other electrical specifications are compatible with OPAL-RT DB37 specifications of I/O module OP48H10.

Connector P1 (top) Slot 2 - Section A - Channels 00 to 15				Connector P2 (bottom) Slot 2 - Section A - Channels 16 to 31
DB37F Pin	Assignment	DB37F Pin	Assignment	DB37F Pin	Assignment	DB37F Pin	Assignment
1	+DIO00	20	GND	1	+DIO16	20	GND
2	+DIO01	21	GND	2	+DIO17	21	GND
3	+DIO02	22	GND	3	+DIO18	22	GND
4	+DIO03	23	GND	4	+DIO19	23	GND
5	+DIO04	24	GND	5	+DIO20	24	GND
6	+DIO05	25	GND	6	+DIO21	25	GND
7	+DIO06	26	GND	7	+DIO22	26	GND
8	+DIO07	27	GND	8	+DIO23	27	GND
9	+DIO08	28	GND	9	+DIO24	28	GND
10	+DIO09	29	GND	10	+DIO25	29	GND
11	+DIO10	30	GND	11	+DIO26	30	GND
12	+DIO11	31	GND	12	+DIO27	31	GND
13	+DIO12	32	GND	13	+DIO28	32	GND
14	+DIO13	33	GND	14	+DIO29	33	GND
15	+DIO14	34	GND	15	+DIO30	34	GND
16	+DIO15	35	GND	16	+DIO31	35	GND
17	Reserved	36	GND	17	Reserved	36	GND
18	Reserved	37	Reserved	18	Reserved	37	Reserved
19	GND			19	GND

The OP48H10 32-channel digital IOs configured per 8-channel subsections to be used as digital inputs or digital outputs. The following table is a list of parameters to configure as input or output.

I/O MODULE OPTION BLOCK
Parameters	CH00-07 / CH08-15 / CH16-23 / CH24-31
Controller Name	'OP4810 OpCtrl'
Type H I/O module	OP48H10 - Fast I/O type H Module
Direction	Input	Output
Threshold low level (volt)	0.8 V or 1.5 V*	0.55 V
Threshold high level (volt)	2.0 V or 3.5 V*	2.7 V or 4.3 V*
* ttl 5v mode

DIGITAL OUTPUT BLOCK PARAMETERS
Parameters	CH00-07	CH08-15	CH16-23	CH24-31
Controller Name	'OP4810 OpCtrl'
Data In Port Number	71	8	9	10
Number of channels	8
Digital Output Type	Static Digital Out Event Generator Pulse-Width Modulated Output

DIGITAL INPUT BLOCK PARAMETERS
Parameters	CH00-07	CH08-15	CH16-23	CH24-31
Controller Name	'OP810 OpCtrl'
Data Out Port Number	9	10	11	12
Number of channels	8
Digital Input Type	Static Digital In Event Detector Pulse-Width Modulated Input

HIL2GO Bundles

HIL2GO-310 - I/O Slot 2, Section A, P1 and P2 (CH 00-31) - Digital Inputs or Outputs (OP48H10)

Analytics