OP5367 DB37F Pin Assignment

The following tables provide the general pin assignments for the OP5367 DB37 connectors.

Detailed pin assignments for all connectors can be found in the System Description document provided with your order, or refer to the general pin assignment of your specific unit.

Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations.

Group A and B - Connector P1 - Channel 00 to 15				Group A and B - Connector P2 - Channel 16 to 31
DB37F Pin	Assignment	DB37F Pin	Assignment	DB37F Pin	Assignment	DB37F Pin	Assignment
1	+D00	20	GND_ISO**	1	+D16	20	GND_ISO
2	+D01	21	GND_ISO	2	+D17	21	GND_ISO
3	+D02	22	GND_ISO	3	+D18	22	GND_ISO
4	+D03	23	GND_ISO	4	+D19	23	GND_ISO
5	+D04	24	GND_ISO	5	+D20	24	GND_ISO
6	+D05	25	GND_ISO	6	+D21	25	GND_ISO
7	+D06	26	GND_ISO	7	+D22	26	GND_ISO
8	+D07	27	GND_ISO	8	+D23	27	GND_ISO
9	+D08	28	GND_ISO	9	+D24	28	GND_ISO
10	+D09	29	GND_ISO	10	+D25	29	GND_ISO
11	+D10	30	GND_ISO	11	+D26	30	GND_ISO
12	+D11	31	GND_ISO	12	+D27	31	GND_ISO
13	+D12	32	GND_ISO	13	+D28	32	GND_ISO
14	+D13	33	GND_ISO	14	+D29	33	GND_ISO
15	+D14	34	GND_ISO	15	+D30	34	GND_ISO
16	+D15	35	GND_ISO	16	+D31	35	GND_ISO
17	Refer to unit’s pin assignment*	36	Refer to unit’s pin assignment*	17	Refer to unit’s pin assignment*	36	Refer to unit’s pin assignment*
18	Reserved	37	GND_ISO	18	Reserved	37	GND_ISO
19	Refer to unit’s pin assignment*			19	Refer to unit’s pin assignment*

* Unit can be a Real-time Simulator or an FPGA Processor and IO Expansion Unit from the OP4000 or the OP5000 series.
** GND_ISO: Isolated ground