Shunt Resistance

Description

Grounded resistor.

Table of Contents

Mask and Parameters

Name	Description		Unit	Variable = {Possible Values}

Name	Description	Unit	Variable = {Possible Values}
Connection Type	For shunt elements, three types of connections are available for three-phase connections: Ground Y Connection: one end of the shunt RL element is connected to a bus and the other end to the ground. Floating Y Connection: one end of each RLC branch of the RLC element is connected to a phase at the end of the bus, while the other ends are connected together, but not to the ground. Delta Connection (or triangle): In the case of a Delta connection, the three RL branches of a three-phase element are Delta connected, and each top of the Delta is connected to a phase of the bus.		Connection type = {Y ground, Y floating, Delta}
R	Resistance value for each phase.	Ω
Base Power	Total Base power.	MVA
Base Voltage	Base voltage rms LL if the resistor is connected to a 3-phase bus and rms LN is only one phase is connected.	kV
Base Frequency	Base frequency.	Hz