Documentation Home Page ◇ HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Shunt R-C

Owned by Sylvain Ménard
Last updated: Mar 16, 2023
1 min read

Shunt R-C

Description

Grounded resistor and capacitor.


Table of Content

Mask and Parameters

 

NameDescriptionUnitVariable = {Possible Values}
Connection Type

For shunt elements, three types of connections are available for three-phase connections:

  • Ground Y Connection: one end of the shunt RL element is connected to a bus and the other end to the ground.

Y Ground Connection of a Shunt RL Element, as shown in a diagram (a) and in a reality (b)

  • Floating Y Connection: one end of each RLC branch of the RLC element is connected to a phase at the end of the bus, while the other ends are connected together, but not to the ground.

Floating Y Connection of a Shunt RL Element, as Shown in a Diagram (a) and in Reality (b)

  • Delta Connection (or triangle): In the case of a Delta connection, the three RL branches of a three-phase element are Delta connected, and each top of the Delta is connected to a phase of the bus.

Delta Connection of a Shunt RL Element, as Shown in a Diagram (a) and in Reality (b)


RResistance value for each phase.Ω
CCapacitor value for each phase.F
Base PowerTotal Base power.MVA
Base VoltageBase voltage rms LL if the shunt R-C is connected to a 3-phase bus and rms LN is only one phase is connected.kV
Base FrequencyBase frequency.Hz
Enable User Initial Value


Initial VoltageInitial voltage, cannot be modified while the simulation is running.V


OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter