Documentation Home Page ◇ HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Shunt R-L-C

Owned by Sylvain Ménard
Last updated: Mar 16, 2023
1 min read

Description

Ground resistor, inductor and capacitor.


Table of Contents

Mask and Parameters

 

NameDescriptionUnitVariable = {Possible Values}
Connection Type

For shunt elements, three types of connections are available for three-phase connections:

  • Ground Y Connection: one end of the shunt RL element is connected to a bus and the other end to the ground.

Y Ground Connection of a Shunt RL Element, as shown in a diagram (a) and in a reality (b)

  • Floating Y Connection: one end of each RLC branch of the RLC element is connected to a phase at the end of the bus, while the other ends are connected together, but not to the ground.

Floating Y Connection of a Shunt RL Element, as Shown in a Diagram (a) and in Reality (b)

  • Delta Connection (or triangle): In the case of a Delta connection, the three RL branches of a three-phase element are Delta connected, and each top of the Delta is connected to a phase of the bus.

Delta Connection of a Shunt RL Element, as Shown in a Diagram (a) and in Reality (b)


RResistance value for each phase.Ω
LInductor value for each phase.H

C

Capacitor value for each phase.F

Base Power

Total Base power.MVA
Base VoltageBase voltage rms LL if the shunt R-L-C is connected to a 3-phase bus and rms LN is only one phase is connected.kV
Base FrequencyBase frequencyHz
Enable User Initial Value


Initial CurrentInitial current, cannot be modified while the simulation is running.A
Initial VoltageInitial voltage, cannot be modified while the simulation is running.V


OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323