AsyncGenSingleCage

Symbol	Description	Unit

Symbol	Description	Unit
Bus	Bus name (Bus ID)	a unique name
ID	Machine name (Machine ID)	a unique name
Status	Connect/Disconnect status	1 for connected 0 for disconnected
Pg (MW)	Active power	MW
Qg (MVAr)	Reactive power	MVAr
Qmin (MVAr)	Minimum reactive power for the machine (used in power-flow)	MVAr
Qmax (MVAr)	Maximum reactive power for the machine (used in power-flow)	MVAr
Sbase (MVA)	Power base	MVA
Pmech0 (p.u.)	Mechanical power at synchronous speed	in machine p.u.
H (s)	Inertia	second
Ra (pu)	Stator resistance	in machine p.u.
x (pu)	Synchronous reactance	in machine p.u.
x' (pu)	Transient reactance	in machine p.u.
x_l (pu)	Stator leakage reactance	in machine p.u.
T' (s)	Transient rotor time constant	second
e1 (pu)	Field Voltage	in machine p.u.
e2 (pu)	Field Voltage	in machine p.u.
S(e1)	Saturation function value for e1 input	in machine p.u.
S(e2)	Saturation function value for e2 input	in machine p.u.

AsyncGenDoubleCage

Symbol	Description	Unit

Symbol	Description	Unit
Bus	Bus name (Bus ID)	a unique name
ID	Machine name (Machine ID)	a unique name
Status	Connect/Disconnect status	1 for connected 0 for disconnected
Pg (MW)	Active power	MW
Qg (MVAr)	Reactive power	MVAr
Qmin (MVAr)	Minimum reactive power for the machine (used in power-flow)	MVAr
Qmax (MVAr)	Maximum reactive power for the machine (used in power-flow)	MVAr
Sbase (MVA)	Power base	MVA
Pmech0 (p.u.)	Mechanical power at synchronous speed	in machine p.u.
H (s)	Inertia	second
Ra (pu)	Stator resistance	in machine p.u.
x (pu)	Synchronous reactance	in machine p.u.
x' (pu)	Transient reactance	in machine p.u.
x" (pu)	Sub-transient reactance	in machine p.u.
x_l (pu)	Stator leakage reactance	in machine p.u.
T' (s)	Transient rotor time constant	second
T" (s)	Sub-transient rotor time constant	second
e1 (pu)	Field Voltage	in machine p.u.
e2 (pu)	Field Voltage	in machine p.u.
S(e1)	Saturation function value for e1 input	in machine p.u.
S(e2)	Saturation function value for e2 input	in machine p.u.

No	Pin Description	Pin Type	Value/Unit	Instruction

No	Pin Description	Pin Type	Value/Unit	Instruction
1	Get rotor speed deviation	O	p.u.	machineID/pins/slip
2	Get injected current magnitude	O	p.u. (machine base)	machineID/pins/Imag
3	Get injected current angle	O	Degree	machineID/pins/Iang
4	Set/Get service status	I/O	1: In-service 0: Out-of-service	machineID/pins/status
5	Get generated active power	O	MW	machineID/pins/Pelec
6	Get generated reactive power	O	MVAr	machineID/pins/Qelec

See the Machine page in phasor22_IEEE39_IM.xlsx file in demo ePHASORSIM example phasor22.