Switch, Breaker and Recloser Data

Entry	Description	Acceptable values

Entry	Description	Acceptable values
Section ID	Component identifier	The section ID may not contain blank spaces.
Status (in ‘Settings’ box)	Connection status of the component	Connected
Phase	Phase present in the network	Any selection on the combination of A, B and C.
State (in ‘Settings’ box)	Working states of the component	Any selection in the drop-down menu.

Notes

When the switch, breaker or recloser is on (closed) the series resistance between the ‘From Bus’ and ‘To Bus’ is 1e-6 ohm. On the other hand, when they are off (open), the series resistance between the ‘From Bus’ and the ‘To Bus’ is 1e6 ohm. The shunt admittance connected to the switch, breaker and recloser is G=1e-6 Siemens.
A closed breaker or switch inside a line section will be neglected during the conversion procedure.