Documentation Home Page Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

OP7000V2 Specifications

Product name

OP7000V2 Simulator

FPGAXilinx Kintex-7 410T on one Primary board (OP7170-1, required) and up to eight Secondary boards (OP7170-2, optional)
Communication interfaces

One PCIe x4 interface

Four SFP sockets for 1-5 Gbps Aurora-based communication

MUlti-System Expansion (MuSE) link support

OP7000V2: Central mode supporting up to 4 remote units (default)

OP700V2-IO-REMOTE: Remote mode

I/O connectors

DB37 or optical transceivers, depending on the I/O cards installed. See the specifications for each board in section OP7000 IO Modules

Monitoring connectors

RJ45 on front modules

RJ45 and BNC on OP7000 front panel

Programming connectorJTAG micro-AB USB2
On-board memoryTwo 4Gb DDR3 SDRAM

Power supply

Universal input and active power factor correction 650W continuous power DC to DC converters for analog voltage

Dimensions (HxWxD)

26.67 x 48.26 x 41.5 cm (10.5” x 19” x 16.5“)


9 to 14 Kg, depending on the I/O and FPGA cards installed

Operating temperature

10 to 40 ºC (50 to 104ºF)

Storage temperature

-55 to 85ºC (-67 to 185ºF)

Relative humidity

10 to 90% non-condensing

Maximum altitude

2000 m (6562 ft.)

Special Notes

Software compatibility

  • The OP7000V2 can only be used with RT-LAB or HYPERSIM versions 2019.2 or above.
  • The OP7170 bitstream must be produced with RT-XSG 3.2.6 or above.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | | +1 514-935-2323