This section provides a description of the hardware included with the basic simulation system (with the OP7000V2 at its core) and how to connect the various cables between devices.
Before beginning to install your system, verify that all the standard (and optional) components are present.
Connecting the Ground Screw
You must connect a grounding cable from the OP7000 ground screw to the rack where it is installed to ensure that the OP7000V2 terminates securely in a ground. Proper grounding helps prevent electric shocks, protects the OP7000V2 from voltage spikes (from a variety of causes, including lightning strikes), and provides increased immunity from EMI by lowering noise levels and emissions.
Select a flat braided grounding strap of adequate length (as short as possible, yet that provides the best protection), with ring terminals on each end