OP7000V2 Required and Optional Boards

The front section contains the carrier boards and conditioning modules with connectors for monitoring and the rear section contains conditioning boards for connections from the unit under test.

*The OP7161 and OP7461 boards are the core of the OP7000 and are not optional. Consult your sales representative for the complete list of available signal conditioning boards.

Boards used in the back of the unit must correspond to the type of boards used in the front.

Example: if an Analog Outboard is used in front slot #1, then a matching Analog outboard must be used in the rear slot #1.

OP7000 I/O Board Type Pairings

FRONT BOARDS	Front Boards	REAR BOARDS	DESCRIPTION
ANALOG I/Os	OP7220 Universal Carrier with OP5330 or OP5340 mezzanine card. Required for use of back analog IO cards	OP7811	OP7000_Rear_Interface_DB37 (Passthrough)
ANALOG I/Os		OP78E0	OP7000_6U_AIO_Carrier_DB37 for Type E Modules (Max of 4 modules per carrier)
DIGITAL I/Os	OP7353 Front Monitoring Interface	OP7816 - 2	OP7000 Rear Opto-Isolated Digital Input: 16-Din DB37 connector
		OP7817 - 2	OP7000 Rear Opto-Isolated 16-Dout, Push-Pull 5V to 30V, DB37 connector
		OP7820	OP7000 Rear 8TX and 8RX DC to 50 MBd Fiber Optic link, 650nm
		OP7821	OP7000_Rear_16Dout_SSR_250V_200mA (Normally Open Relay)
		OP7822	OP7000_Back_6TX_6RX_Fiber_Optic_ link_820nm
		OP7823	OP7000 Rear 16RX DC to 50 MBd Fiber Optic link, 650nm
		OP7824	OP7000 Rear_16TX_DC_to_50_MBd_Fiber_ Optic_link_650nm