Documentation Home Page ◇ HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
DC2A
Description
This module is based on the IEEE Std 412.5 type DC2A excitation system model [1]. The excitation system uses a field controlled DC commutator to the terminal voltage.
Mask and Parameters
AVR Parameters
Expanding the "DC2A diagram" displays the block diagram in the parameters window.
Name | Description | Unit |
|---|---|---|
Tr | Regulator input filter time constant | s |
Tb | Voltage regulator time constant | s |
Tc | Voltage regulator time constant | s |
Ka | Voltage regulator gain | - |
Ta | Regulator time constant | s |
Kf | Excitation control system stabilizer gain | - |
Tf | Excitation control system stabilizer time constant | s |
VRmax | Maximum voltage regulator output | pu |
VRmin | Minimum voltage regulator output | pu |
Exciter Parameters
Expanding the "Exciter diagram" displays the block diagram in the parameters window.
Name | Description | Unit |
|---|---|---|
Te | Exciter time constant | s |
Ke | Exciter constant related to self-excited field | - |
Se1, Se2 | Exciter saturation factor at the corresponding Vex | pu |
Efd1, Efd2 | Exciter voltage for the exciter saturation function | pu |
Initial Values Mask Parameters
Name | Description | Unit | |
|---|---|---|---|
Efd0 | Exciter output voltage initial value |
| pu |
The parameter Efd0 can be set manually, by entering a numerical value. It can also be set automatically based on load flow calculations, by entering a referenced synchronous machine variable. For instance, if the name of the synchronous machine on which the excitation system is connected is “SM1”, then Efd0 shall be set as “=SM1.EfdInit” if a thermal machine or a hydraulic machine is used, and as "=SM1.EFD_Init" if a pu standard or pu fundamental machine is used.
The HYPERSIM® simulation option Set Initial Conditions must be checked for the automatic initialization to work properly.
Inputs and Outputs and Signals Available for Monitoring
Inputs
Name | Description | Unit |
|---|---|---|
Vc1 | Signal proportional to compensated terminal voltage If a load compensator block is not used upstream from the exciter block, then Vc1 is equal to Vt (main alternator terminal voltage) | pu |
Vref | Voltrage regulator reference voltage | pu |
Vs | Is defined as the output voltage of a power system stabilizer (PSS) | pu |
Vuel | Underexcitation limiter output | pu |
Outputs
Name | Description | Unit |
|---|---|---|
Efd | Exciter output voltage | pu |
References
1. “IEEE Recommended Practice for Excitation System Models for Power System Models for Power System Stability Studies,” IEEE Standard 421.5-2005.