Documentation Home Page Specialized Solutions Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

OP8110 4Q Power Amplifier

Section Content

The OP8110 4-Quadrant Power Amplifier is the heart of the OPAL-RT line OP1400 Series test benches. It is an ultra-compact (2U) 4 Quadrants – 3 or 6 output – Power Soft-Switching Amplifier. It features a DC to 10kHz bandwidth, low noise floor, fast slew rate and extremely low harmonic distortion even under no-load conditions over all the bandwidth.

The OP8110 can be directly controlled by OPAL-RT’s simulation platforms through a high-speed fiber-optic SFP link, enabling it to emulate many different power topologies such as:

  • 3-phase 208Vline-to-line microgrid

  • 3-phase 400Vline-to-line microgrid

  • Single phase 120V/240V microgrid

  • 400VDC bus

  • ±400VDC bus

  • Other custom high voltage topologies

It can safely drive a wide range of resistive or inductive loads for up to 1.67kVA of apparent power per output, for a total of 5kVA for the three-output model and 10kVA for the six-output model. Protection circuits protect the OP8110 from improper input/output connections (including shorted and unbalanced loads), over-temperature, over-current and supply under/overvoltages.

The OP8110 features forced ambient air cooling with variable-speed fans which make it suitable for installation in any typical laboratory environment.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | | +1 514-935-2323