Documentation Home Page ◇ HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
DNP3 Master | Connections
- Sylvain Ménard
Once the I/O interface has been configured as desired, the user will have to connect signals in the model to data points in the driver by using the designated HYPERSIM sensors. The driver's connectable points depend on the number of slaves and on the number of analog and digital inputs and outputs of each slave.
The following lists the driver connectable points for an input (analog, binary or double-bit binary) and an output (analog or binary).
Analog / binary inputs
| Connection point | Direction | Description |
|---|---|---|
| Analog input X, Binary input X or Double-bit binary input X (X being the number of the point in its related configuration list) | From model to driver | Data value |
Analog / binary outputs
| Connection point | Direction | Description |
|---|---|---|
| Analog output X or Binary output X (X being the number of the point in its related configuration list) | From driver to model | Data value |
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter