Documentation Home Page HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

DNP3 Slave | Connections

Once the I/O interface has been configured as desired, the user will have to connect points in the model to points in the driver by using the designated HYPERSIM sensors. The driver's connectable points depend on the number of analog and digital inputs and outputs that the slave has.

The following lists the driver connectable points for an input (analog, binary or double bit binary) and an output (analog or binary).


Analog / binary inputs

Connection pointDirectionDescription

Analog input X, Binary input X or Double bit binary input X (X being the number of the point in its related configuration list)

From driver to modelData value


Analog / binary outputs

Analog

Connection pointDirectionDescription
Analog output X (X being the number of the point in its related configuration list)From model to driverData value

Binary

If the Operate as trip/close pair parameter is off:

Connection pointDirectionDescription
Binary output X (X being the number of the point in its related configuration list)From model to driverData value

If the Operate as trip/close pair parameter is on:

Connection pointDirectionDescription
Binary output X trip (X being the number of the point in its related configuration list)From model to driverData value for the 'trip' output
Binary output X close (X being the number of the point in its related configuration list)From model to driverData value for the 'close' output

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter