Documentation Home Page ◇ eHS Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
FPGA 64-to-64 Interconnect Controller Block
Block
Description
This block is used to control an FPGA 64-to-64 Interconnect block used to set dynamically the signal interconnections on FPGA. It should be connected to an FPGA 64-to-64 Interconnect Control Panel that will set this interconnection information according to the selected pattern.
Mask Parameters
Controller Name:Bind this block to an OpCtrl block by entering the same 'Controller Name' as specified in the OpCtrl block The OpCtrl block controls initialization of the settings of one specific FPGA in the system.
LoadIn port number for interconnection information: Enter the number of the LoadIn port used to communicate the interconnection information for this block, in the range [1:32].
Inputs
XC_Cfg: This signal contains the interconnection information. It should be connected to the output of a "FPGA 64-to-64 Interconnect Control Panel" block.
Outputs
This block has no output.
Characteristics and limitations
This block has no special characteristics.
Direct Feedthrough | NO |
Discrete sample time | YES |
XHP support | YES |
Work offline | N/A |
If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.