Documentation Home Page ◇ eHS Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Selectable Digital Output
Block
SCHEMATIC EDITOR SPS
Table of Contents
Description
This block implements an 8-channel digital output subsection as either Static digital output, EventGenerator output or Pulse-Width Modulated output.
Mask
Inputs
LoadInSel: This port should be connected to the LoadIn port carrying the Digital Output type selection.
DataIn: This port should be connected to a DataIn port.
DataInSof: This port should be connected to a DataInSof port, with the same index as the port connected to the DataIn input of this block.
LoadIn: This port should be connected to a LoadIn port.
LoadInSof: This port should be connected to a LoadInSof port, with the same index as the port connected to the LoadIn input of this block.
Outputs
HSOut: This port corresponds to the 8-bit signal corresponding to one IO-Group subsection.
Characteristics and limitations
This block has no special characteristics.
Direct Feedthrough | NO |
Discrete sample time | YES |
XHP support | N/A |
Work offline | YES |
If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.