Description

Opal-RT Saturable transformer - This block is an addon to the eHS to simulate the saturation behavior of electric transformers. It supports up to 30 single phase saturable transformers. It is only compatible with the eHS Gen4.

Mask

Inputs

From eHS CPU Unpacking: This input is used to configure the saturable transformer's tables and internal registers. It requires to be connected on the output of the eHS Gen4 unpacking block, signal that is connected to the "From CPU" inport of the eHS Gen4 block.

From eHS low latency outputs: This port is used to read real time states from the eHS block. It requires to be connected on the "Low latency outputs" port of the eHS Gen4 block.

Outputs

FLWS Output:This output port provide a FLWS signal to feedback the saturable transformers' states to the eHS Gen4 block. It requires to be connected on one of the "Extra Ux" port of the eHS Gen4 block.

Characteristics and limitations

If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.