Documentation Home Page ◇ eHS Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Generic High Speed Communication Block for eHS - efs_inter_ehs_sfp

Owned by Sylvain Ménard
Last updated: Mar 07, 2023

Block

Table of Contents

Description

This block sends the first 16 data of FLWS bus to a generic high speed communication block,reads back data received at the same port, and sends them as an FLWS bus to eHS core as external input.

Mask Parameters

Channel Number Selection: Use this parameter to select the communication channel number. The default value is zero.

Inputs

fromEhs: This input should be connected to the eHS low latency outputs and it only uses first 32 MSB bits.

Outputs

toEhs: This output is connected to eHS core as external input and it is composed of Xfloat8_34 signals.

Characteristics and limitations

This block has no special characteristics or limitations.

Direct FeedthroughN/A
Discrete sample timeN/A
XHP supportN/A
Work offlineN/A


If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter