Documentation Home Page eHS Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

eHS to Machines Mapping Interface - efs_xsgEhsMachineMapping

Block


Table of Contents

Description

This block provides a standard eHS to Machines Mapping Interface. It allows the user to route signals from the eHS outputs to any of the machine models connected using a user-defined configuration.


Mask


Inputs

LoadIn: This input should be connected to a LoadIn port. It receives the user-defined configuration from the RT-LAB model.

LoadInSof: This input should be connected to a LoadIn SOF port. Port number must be the same as LoadIn one.

From eHS: This input carries the signals coming from eHS ( Data Signal, Valid Signal, Last signal and Reset).


Outputs

Sync: This output is active high. When active, it triggers the writting of outputs using user-defined configuration.

EhsRst: This output is used as a active high global reset for the functionality. When used, user-configuration needs to be sent again, and data is equal to 0.

DualMotorVDQ_0: This output provides the data needed for the mux containing the three-phase voltage (Vabc) of the first PMSM.

DualMotorVDQ_1: This output provides the data needed for the mux containing the three-phase voltage (Vabc) of the second PMSM.

DualMotorVDQ_2: This output provides the data needed for the mux containing the three-phase voltage (Vabc) of the third PMSM.

DualMotorVDQ_3: This output provides the data needed for the mux containing the three-phase voltage (Vabc) of the fourth PMSM.

MotorIM_0: This output provides the data needed for the rotor and stator voltage of the first induction Machine.

MotorIM_1: This output provides the data needed for the rotor and stator voltage of the second induction Machine.

MotorIM_2: This output provides the data needed for the rotor and stator voltage of the third induction Machine.

MotorIM_3: This output provides the data needed for the rotor and stator voltage of the fourth induction Machine.

MotorSRM_0: This output provides the data needed for the five-phased (Vabcde) voltage of the first Switched Reluctance Machine.

MotorSRM_1: This output provides the data needed for the five-phased (Vabcde) voltage of the second Switched Reluctance Machine.


If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter