Description

This block filters the output data stream based on a given Param ID allowing the Valid signal only when the Param ID set in the mask matches signal's Param ID.

Mask Parameters

Param ID: This parameter sets the Param ID value to be filtered.

Inputs

Init_data_in: The decoded data stream from the Init decoder's output signal should be connected to this port.

Outputs

Init_data_out: The filtered data stream is outputted through this port. It has the following signal form: Data, Valid, Addr, DataID and Reset

Characteristics and limitations

If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.