/
Rescale from Fixed Point Format
Documentation Home Page ◇ RT-XSG Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Rescale from Fixed Point Format
- Sylvain Ménard
Owned by Sylvain Ménard
Block
Mask
Parameters
| Type of numerical format | Specifies if the signal will be interpreted as Signed or Unsigned. |
|---|---|
| Total number of bits | Specifies the total number of bits of the fixed-point format. |
| Number of fractional bits | Specifies the number of fractional bits of the fixed-point format (the number of bits on the right-hand side of the binary point). This parameter sets the resolution of the signal. |
Inputs
| INT | This signal is the input signal, in the fixed-point numerical format. It is assumed that this signal is in the Simulink uint32 format, and the effective signal corresponds to the LSBs of the integer, with the width specified in the appropriate block parameter. |
|---|
Outputs
| DBL | This signal is the floating-point signal, in the double format. |
|---|
Characteristics and Limitations
The total number of bits of the input signal is limited to 32 bits.
| Direct Feedthrough | N/A |
|---|---|
| Discrete sample time | N/A |
| XHP support | N/A |
| Work offline | YES |
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter