Documentation Home Page ◇ RT-XSG Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Selectable Digital Output Block
Block
Mask
Description
This block implements an 8-channel digital output subsection as either Static digital output, EventGenerator output or Pulse-Width Modulated output.
Parameters
| Provide isConfigured Port | This parameter allows an extra output port to indicate the state of configuration of this block. A typical application is with OP5369. |
|---|
Inputs
| DataIn | This port should be connected to a DataIn port. |
|---|---|
| DataInSof | This port should be connected to a DataInSof port, with the same index as the port connected to the DataIn input of this block. |
| LoadIn | This port should be connected to a LoadIn port. |
| LoadInSof | This port should be connected to a LoadInSof port, with the same index as the port connected to the LoadIn input of this block. |
Outputs
| HSOut | This port corresponds to the 8-bit signal corresponding to one IO-Group subsection. |
|---|
Characteristics
This block has no special characteristics.
| Direct Feedthrough | NO |
|---|---|
| Discrete sample time | YES |
| XHP support | N/A |
| Work offline | YES |
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323