Block

Mask

This block recovers the data from an EnDat Master Interface block and generates the signals needed by the DataOut block.

This block has no parameters.

Position Value	Position Value received from the EnDat Master block.
Additional Data1	Additional Data 1 received from the EnDat Master block.
Additional Data2	Additional Data 2 received from the EnDat Master block.
Valid	Output Status from the EnDat Master.
CRC Error	CRC Status bits from the EnDat Master block.
Error 1	Error bit 1 of EnDat protocol (Alarm1).
Error 2	Error bit 2 of EnDat protocol (Alarm2).

DataOut	This port supplies a valid bit and the serialized data of the status/result data received from the EnDat Master block. It is meant to interface the DataOut block to one of its Data_OUTi port.
DataSync	This port supplies a pulse to indicate the update of the DataOut port. It is to be connected to the DataSynci input port of the DataOut block, with the same i chosen for DataOut port.

This block has no specific characteristics or limitations.