Block

Mask

This block recovers the data from a digital out Interface block and generates the signals needed by the DataOut block.

This block has no parameters.

Sync	This signal is the synchronization pulse train. It is usually connected to the ModelSync signal.
TimeOn[X] where X=[0,7]	This signal corresponds to the total ‘on’ time, in clock ticks, of the last PWM period. It is 20-bit wide.
Period[X] where X=[0,7]	This signal represents the total duration value, in clock ticks, of the last PWM period. It is 20-bit wide.

DataOut	This signal contains the data of an PWM subsection and a valid bit. It is meant to interface the DataOut block.
DataSync	This signal represents a pulse to indicate the update of the DataOut port. It is to be connected to the DataSynci input port of the DataOut block corresponding to the channel selected for the DataOut signal.

This Block has no specific characteristics or limitations.