Documentation Home Page RT-XSG Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Digital Subsection Handler

Block

Mask

Description

This block should be used to connect digital applications (e.g. Static, Time-stamped, PWM, Selectable) to/from an I/O Interface block and application block.

Parameters

Signal direction

This parameter is used to indicate the connectivity of I/O Interface block to connect to.

I/O block interface type

This parameter is used by the designer to easily match the connections with a following I/O Interface block and application block. The extraction/concatenation of signal is done regarding the option chosen.
Number of channels
This parameter is available only if the I/O block interface type is Channel-based. The parameter is used to indicate the number of ports the current block should have on its desired matching Signal direction ports.
Number of subsections
This parameter is available only if the I/O block interface type is Concatenated. The parameter is used to indicate the number of ports the current block should have on its desired matching Signal direction ports.

Inputs

DI, Digital InputThis port is shown accordingly to the parameters of the block. It should be connected directly to an Input Interface block.
ChX where X=[01,32]This port is shown accordingly to the parameters of the block. Those signals are to be connected directly to an Input Interface block.
Subsection[X] where X=[1,4]This port is shown accordingly to the parameters of the block. Each port represents a concatenation of 8 channels. Those signals are to be connected directly to an application block.

Outputs

DO, Digital OutputThis port is shown accordingly to the parameters of the block. It can fed up to 4 subsections to an Output Interface block.
ChX where X=[00,31]This port is shown accordingly to the parameters of the block. It can fed up to 32 channels an Output Interface block.
Subsection[X] where X=[1,4]This port is shown accordingly to the parameters of the block. Each port represents a concatenation of 8 channels. Those signals are to be connected directly to an application block.

Characteristics and Limitations

This block has no special characteristics or limitations.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323