Block

Mask

This block implements the standard way to package 8 PWMI functionality blocks into the standardized I/O interface.

This block has no parameters.

PWMIn	This signal is the input lines. If the port width is larger than one, the signal MSBs are disregarded.

Sync	This signal is the synchronization pulse train. It is connected to the ModelSync signal.
TimeOn[X] where X=[0,7]	This signal is the 20-bit wide Time-On value, corresponding to the total ‘on’ time, in clock ticks, of the last PWM period. This output is updated at the beginning of any PWM period with the last period data (Rising edge of HSDin for active-high signals or falling edge for active-low signals (see PWMI for further detail)).
Period[X] where X=[0,7]	This signal is the 20-bit wide PWM period total duration value, in clock ticks, of the last period. This output is updated at the beginning of any PWM period with the last period data (Rising edge of HSDin for active-high signals or falling edge for active-low signals (see PWMI for further detail)).

This block has no special characteristics.